No Production Stoppage
Our system is a non-contact measuring system. It keeps the boards moving freely which decreases your down time and keeps your measurements more precise, so you get the most out of each board.
Increase Premium Cuts
Our CMOS cameras have a resolution of 1280 x 1024 pixels. This high resolution provides ultra-precise measurement of warp defects, +/-0.125’’. The high level of precision allows end trimming and cut in two products, increasing your premium lumber output.
Minimal Mill Modification
The warp system only requires 28 inches of space over the length of the conveyor classifier. You increase your profits without making significant modifications to your mill configuration.
Features
- A combined system of cameras and lasers for real-time accurate measurements
- Annual calibration done by VAB service technician
- Non-contact system
- Measurement done in the lug chain
- Warp allows end trimming or cut-in-two products
- In-house grade rules feature available
Technical Specs
- Power Supply: 24 VDC 120 VAC
- Minimal cycle time: 8 ms
- Operation pressure: 5 @ 70 psi
- Lifetime: 20,000,000 cycles
- Electrical protection for spikes
- CSA certification
